Open-Length Timing Belts, PU, AT20

Category

AT20 PU timing belt

For the AT20 PU timing belt, send a pulley drawing or an existing belt sample, together with the required width, finished length or tooth count. Matching the tooth profile to your machine helps us discuss the finished belt construction.

Tooth surface, back and edge views
Item Product details
Designation AT20
Product type PU timing belt — open-length supply
Tooth profile and pitch Match to your pulley drawing or belt sample
Belt width and cut length Specify in your inquiry

Please share your pulley drawing or belt sample so we can match the tooth profile for your machine.

AT20 profile and open-length supply

Side view of a white timing belt showing its tooth outline
AT20 belt viewed from the side, showing the tooth outline and smooth back.

Define the length between the right points

For an open-length belt, specify the cut length and measurement units. If the ends fit into clamps, show the clamped portions and the working span separately on the drawing. This avoids ordering only the travel distance when extra material is required at the ends.

Show how both ends are secured

Include an end-clamp drawing or photographs, the belt orientation and any required end preparation. Mark holes, slots or attachment positions from a common datum. Discuss these features with the belt construction before specifying machining through the belt.

Check the complete belt route

Provide pulley profiles and sizes, guide locations, reverse bends and the tensioning arrangement. Where the smooth back contacts a roller or support, show that contact in the layout. Include working load, speed and travel or cycle requirements for the mechanism.

Cut pieces, rolls and finished loops

State whether you need individual cut pieces or a longer length for cutting at your facility. List the quantity and length of each piece, with the required end orientation and tolerances. For multiple matching pieces, identify which pieces belong to one machine set.

An open-length order and an endless-belt order need different length references. If the machine requires a closed loop, provide the finished loop specification and joining requirements with your enquiry; a coiled photograph does not define the supplied end configuration.

Questions about this belt

Is the machine travel distance the belt cut length?

Not necessarily. The route around pulleys, end-clamping allowances and tension adjustment can also affect the required length. Use a dimensioned machine layout.

Can a used piece serve as the reference?

Yes, a sample can help identify the profile and end treatment. Include the original drawing or intended finished dimensions as well, because wear, damage or adjustment may affect measurements from the used piece.

See AT5 and AT10 for other AT profiles, or explore our belt-processing workshop.

Timing belt profile comparison

Compare the tooth profiles below. To choose a replacement, match the belt tooth profile to your pulley drawing or sample; dimensions for other profiles should not be used for your machine.

Profile Pitch (mm) Tooth thickness (mm) Belt thickness including teeth (mm)
T2.5 2.5 0.7 1.6
T5 5 1.2 2.2
T10 10 2.5 4.5
T20 20 5 8
AT5 5 1.2 2.7
AT10 10 2.5 4.5
AT20 20 5 8
H 12.7 2.29 4.29
XH 22.225 6.35 11.2
L 9.525 1.91 3.61
XL 5.08 1.27 2.3
3M 3 1.21 2.4
5M 5 2.1 3.7
8M 8 3.38 5.6
14M 14 6.1 10
S3M 3 1.14 2.9
S5M 5 1.85 3.35
S8M 8 3.05 5.3
S14M 14 5.3 10.2
RPP5M 5 2.05 3.8
RPP8M 8 3.2 5.4
RPP14M 14 5.85 9.7
Timing belt profile chart; open for larger view
Timing belt profile illustration. Click the image for a larger view.
Scroll to Top

Get a Quote

Tell us the belt type, size and application, and we will review your requirements.

Include your phone number

Get the Catalog

Enter your name and email to download our 2026 product catalog directly after submitting the form.

We use your details to process your catalog request. See our Privacy Policy.