Timing belt with tooth grinding and rubber covering
This timing belt is offered for glass-edge grinding machine inquiries. The photograph shows a light-coloured belt with a broad contact surface and a toothed side. Send the equipment model, belt drawing and required tooth-processing or rubber-covering details to match the replacement to your machine.
| Item | Product details |
|---|---|
| Product | Timing belt with tooth grinding and rubber covering |
| Machine application | Glass-edge grinding machinery |
| Tooth profile | Match to your pulley drawing or belt sample |
| Finished size | Specify width, length and overall thickness |
| Processing detail | Specify grinding area and covering dimensions |
Include the machine model, existing belt marking and a dimensioned processing drawing.
Define the grinding and covering requirements
Mark the exact tooth area to be ground and the required finished geometry on the drawing. For a rubber-covered contact surface, specify the covering thickness, width and hardness requirement. The photograph alone does not define the processing depth or final tolerances.
| Detail | Information to provide |
|---|---|
| Belt dimensions | Width, finished length or tooth count, tooth height and overall thickness |
| Grinding detail | Location, length, width, depth, finished geometry and tolerances for each processed area |
| Covering and belt | Rubber covering thickness and hardness; required PU, rubber or fabric construction, cord and joint details |
| Machine conditions | Equipment model, pulley drawing, speed, load, temperature and any coolant or cleaning-agent contact |
Profile and pitch reference
The following profile designations and pitches are references for matching your existing belt. A shared pitch does not establish the same tooth shape or finished belt thickness. Use the full profile designation and a cross-section drawing for the required construction.
| Profile designation | Pitch (mm) |
|---|---|
| H | 12.7 |
| L | 9.525 |
| XL, DXL | 5.08 |
| MXL, DMXL | 2.032 |
| S2M | 2.0 |
| S3M, D3M | 3 |
| S5M | 5 |
| 3M | 3 |
| 5M, D5M | 5 |
| 8M, D8M | 8 |
| RPP 14M | 14 |
| T2.5 | 2.5 |
| T5, DT5 | 5 |
| T10, DT10 | 10 |
| AT5 | 5 |
| AT10, DAT10 | 10 |
| AT20 | 20 |
Timing belt profile illustration
This illustration covers several profile families. Match the applicable tooth geometry to your pulley; specify the opposite surface and finished thickness separately.
