PVC conveyor belt with an A18 diamond pattern
This green PVC conveyor belt has an A18 diamond-pattern carrying surface and a fabric underside, shown in the roll and close-up photographs. When ordering an A18 diamond pattern belt, specify the pattern dimensions together with the complete belt size and conveyor arrangement.
| Item | Product details |
|---|---|
| Product | A18 diamond pattern conveyor belt |
| Material | PVC conveyor belt |
| Surface | A18 diamond pattern |
| Colour shown | Green |
| Nominal thickness | 3.0 mm |
Send the machine model, belt dimensions and quantity to request a quote.
Pattern and belt-edge details
Replacement-belt dimensions
The nominal thickness for this A18 belt is 3.0 mm. Specify the finished length and width, joint and any dimensional tolerances with your order.
| Detail | Information to provide |
|---|---|
| Machine | Manufacturer, model and conveyor arrangement |
| Belt dimensions | Finished length, width, total thickness and tolerances |
| Pattern dimensions | Diamond profile, height and spacing and a close-up of the existing surface |
| Installation | Pulley diameters, support bed, tracking guides and joint requirements |
| Conveying duty | Product material and size, speed, load, incline, temperature and cleaning method |
Match the surface and joint to the machine
Provide photographs of the carrying face, underside, edges and joint. Include any uneven wear, surface damage or tracking marks. Match the pattern height and spacing together with the complete belt thickness, conveyed product and conveyor clearances.
Specify the required joint and installation access. Finger and stepped finger joints are selected for the belt construction and pulley arrangement. If a guide is required on the underside, show its profile and position on the drawing.
PVC pattern-belt range reference
The following models are other PVC pattern-belt options. Their dimensions are separate from this A18 diamond pattern belt. Choose the required surface and finished construction for your machine. Scroll the table sideways on smaller screens.
| Type / range | Thickness (mm) | Colour | Layers | Pattern |
|---|---|---|---|---|
| PB22-A18 | 2.2 | Green | 2 | Diamond |
| PB50-A35 | 5.0 | Grey / white | 2 | Fishbone |
| PB60-3M-H | 6.0 | Dark green | 3 | Seaweed |
| PB52-A40 | 5.2 | Green | 2 | Grass |
| PB35-A32 | 3.5 | Green | 2 | Pinstriped |
| PB6-YDG | 6.0 | Green / white | 2 | Embossed dot |
| Golf-pattern range | 2.5 | Dark green | 2 | Golf |
| PB22-A18-W-FDA | 2.2 | White | 2 | Diamond |
Request an A18 diamond pattern belt
Send the machine model, belt drawing or sample, finished dimensions and required quantity. Include the conveyed product details and any surface or joint requirements so the replacement can be matched to the conveyor.
