Link V-belt with mechanical connectors
This power-transmission link V-belt has orange belt sections joined by visible mechanical connectors. The product photograph shows the connection arrangement in three sample widths. Select the belt profile to match the pulley groove and specify the finished length needed for the drive.
| Item | Details |
|---|---|
| Product | Link V-belt |
| Colour | Orange, as pictured |
| Construction | Linked sections with mechanical connectors |
| Application | V-belt power transmission |
| Roll options | Z, A, B and C profiles; 30 m per roll |
Send the pulley profile and required belt length with your enquiry.
Roll supply options
| Profile | Roll length |
|---|---|
| Z | 30 m |
| A | 30 m |
| B | 30 m |
| C | 30 m |
Top-width options
| Profile designation | Top width |
|---|---|
| 3/L | 3/8 inch |
| A | 1/2 inch |
| B | 5/8 inch |
| C | 7/8 inch |
Use the profile designation and pulley groove dimensions together when selecting a replacement. Specify 3/L or Z explicitly in the enquiry so the required profile and supply length can be matched.
Selecting a belt for the drive
Check the pulley groove profile, pulley diameters, shaft spacing and available tensioning travel. The required drive power, operating speed and load pattern help determine the appropriate belt arrangement.
Specify any oil exposure, working temperature or repeated start-stop duty when requesting a belt. Fit and operating suitability depend on the selected profile and the application.
Information for your enquiry
| Item | Details |
|---|---|
| Profile | Existing belt marking and measured pulley groove dimensions |
| Length | Required finished length or roll quantity |
| Drive layout | Pulley diameters, centre distance and number of parallel belts |
| Operating duty | Motor power, drive speed, starting conditions and load variation |
| Environment | Working temperature and contact with oil, dust or chemicals |
Request a power-transmission link V-belt
Send the belt profile, length and quantity, together with photographs of the existing belt and pulleys. For a replacement, include the existing belt marking and the drive details.
