Rubber V-belts for pulley-drive replacement
Select the V-belt by its full profile marking, construction and length. Wrapped and raw-edge cogged constructions are distinct options; match the belt to the pulley groove and the requirements of the drive.
| Item | Details |
|---|---|
| Product | Rubber V-belt |
| Range | Classical and raw-edge cogged constructions |
| Application | Pulley-drive power transmission |
| Selection | Profile, construction and finished length |
Send the complete belt marking and required quantity with your enquiry.
Construction and material options
The raw-edge construction described below combines a tensile cord with rubber and fabric layers. Cogged underside options have grooves to allow the belt to flex around the pulleys. Specify the required construction and rubber compound for your drive.
| Component | 材料 |
|---|---|
| Top fabric | Polyester-cotton canvas |
| Tensile cord | Polyester |
| Bottom rubber | CR or EPDM, according to construction |
| Bottom fabric | Elastic fabric |
Industrial raw-edge section sizes
These section dimensions apply to the named raw-edge profiles. Do not substitute an AX, BX or other X-profile solely from an A, B, C, D or E marking.
| Profile | Top width (mm) | Belt thickness (mm) | Angle (°) |
|---|---|---|---|
| HM | 10.5 | 8.0 | 38 |
| AX | 13 | 8.0 | 38 |
| BX | 17 | 11 | 38 |
| CX | 22 | 14 | 38 |
| DX | 32 | 19 | 38 |
| EX | 38 | 23 | 38 |
Narrow raw-edge profile range
Available profile designations include XPZ, XPA, XPB, XPC, 9NX, 15NX and 25NX. Send the existing belt marking and pulley details when requesting dimensional information for one of these profiles.
Automotive raw-edge profile range
The range also lists AV-10/9.5, AV-13/12.5, AV-15, AV-17 and AV-22. Select by the complete designation and construction; an automotive profile name alone does not identify a vehicle application.
Information for belt selection
| Item | Details |
|---|---|
| Existing belt | Complete marking, construction and photographs of the top, side and underside |
| Length | Required length and the measurement reference used |
| Pulley arrangement | Groove profile, pulley diameters, centre distance and belt count |
| Drive duty | Motor power, operating speed and starting or shock loads |
| Environment | Working temperature and exposure to oil, dust or chemicals |
Request a rubber V-belt
Send the profile, length, construction and quantity. For a multi-belt drive, include the number of grooves and the requirements for a matched set.
