Rubber timing belt for matched replacement
The belt shown has an inner toothed surface and a smooth outer back. To select a replacement, match the complete tooth profile, belt width and pitch length or tooth count to your equipment. Send the existing marking or a dimensioned drawing with your enquiry.
| Item | Product details |
|---|---|
| Product | Rubber timing belt |
| Surface shown | Inner teeth and smooth outer back |
| Profile match | Specify the complete designation |
| Dimensions | Width and pitch length or tooth count |
| Compound | Select for the required working conditions |
Send your belt marking, drawing and required quantity to request a quote.
Material and working conditions
Rubber selection depends on the operating environment and construction. The compound families in our material range include NR, BR, SBR, NBR, CR, EPDM, HNBR, CSM, IIR, NBR/PVC and TPR. Discuss the required compound for your belt; each material has its own performance limits.
| Selection detail | Information to provide |
|---|---|
| Hardness and surface | Required Shore A hardness, contact surface and finish |
| Temperature | Continuous operating temperature, short-term peaks and exposure time |
| Exposure | Contact with oil, water, chemicals, ozone or outdoor conditions |
| Drive and construction | Load, speed, pulley geometry, reinforcement and any electrical-property requirements |
Specify colour separately from the compound and performance requirements. A colour or generic rubber name does not establish oil resistance, temperature capability or antistatic performance.
Tooth-profile reference
The diagram compares several profile families. Use the units shown for each profile and match the full geometry to the pulley. It does not identify the profile or finished dimensions of every belt shown in the product gallery.
Information for a replacement quote
Send the full marking, equipment model, width and finished length or tooth count, together with photographs of the teeth and back. Include the quantity and working conditions so the belt construction can be discussed for your application.
