{"id":7095,"date":"2026-11-21T02:45:03","date_gmt":"2026-11-21T07:45:03","guid":{"rendered":"https:\/\/www.lkbelt.com\/?p=7095"},"modified":"2026-11-21T02:45:03","modified_gmt":"2026-11-21T07:45:03","slug":"custom-conveyor-belt-specification-guide","status":"publish","type":"post","link":"https:\/\/www.lkbelt.com\/zh\/custom-conveyor-belt-specification-guide\/","title":{"rendered":"Custom Conveyor Belts: Drawings, Fabrication Options and OEM Approval"},"content":{"rendered":"<p>A packaging machine needs a nonstandard endless belt. The first supplier offers the correct width and color, but its joint sits beneath a product stop and its underside guide is offset from the machine groove. Both details are easy to miss when a request asks only for a \u201ccustom PVC conveyor belt.\u201d<\/p>\n<p><strong>Specify custom conveyor belts as controlled finished assemblies, not just sheets of belt material cut to size.<\/strong> Define the base-belt construction, finished dimensions, running faces, fabrication features, joint and equipment route on one drawing. Then agree which dimensions and operating checks will be used to approve the first belt before repeating the order.<\/p>\n<p>This guide concentrates on <strong>custom conveyor belts as finished, replacement-ready assemblies<\/strong>, particularly lightweight industrial fabric belts. It does not cover the design of complete custom conveyor systems or guarantee that every proposed fabrication process is available for each material.<\/p>\n<h2 id=\"what-makes-a-conveyor-belt-custom\">What Makes a Conveyor Belt Custom?<\/h2>\n<p>A stock belt might already have the right coating and fabric reinforcement. Customization begins when the finished assembly must fit a specific machine position: unusual width, endless length, special surface, guide position, cleat pattern, sidewalls, perforations, joint or a combination of those details.<\/p>\n<p>For purchasing, the important distinction is between <strong>three specification layers<\/strong>:<\/p>\n<ol>\n<li><strong>Base belt:<\/strong> grade, top cover, fabric or carcass, underside, total thickness and allowable operating conditions.<\/li>\n<li><strong>Finished fabrication:<\/strong> cutting and joining, guides, cleats, sidewalls, holes, surface modifications and their exact locations.<\/li>\n<li><strong>Installed compatibility:<\/strong> pulleys, bending direction, bed contact, take-up, clearances, cleaning and access for fitting.<\/li>\n<\/ol>\n<p>A drawing that specifies only the second layer leaves a supplier to guess whether the selected material and fabrication will survive the first and third. Conversely, a correct base-belt data sheet does not define where a guide must sit on the finished loop.<\/p>\n<p>This is different from ordering a custom <em>conveyor system<\/em>. For example, <a href=\"https:\/\/www.dornerconveyors.com\/solutions\/custom-systems\">Dorner&#8217;s custom conveyor systems overview<\/a> describes machines, controls, positioning and integration. A belt supplier needs the finished belt interfaces from that installation, not an assumption that it can supply the entire system.<\/p>\n<h2 id=\"start-with-a-base-belt-that-fits-the-machine\">Start With a Base Belt That Fits the Machine<\/h2>\n<h3 id=\"specify-both-belt-faces-and-the-reinforcement\">Specify both belt faces and the reinforcement<\/h3>\n<p>The carrying face must handle the product: carton grip, surface release, marking risk or contact with food. The underside may slide over a bed and contact the drive pulley, although the face on each roller depends on the layout. Record the support material and drive-contact face rather than describing only the color on top.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/cleat-pitch-overhead-lkbelt-blog-1024x576.jpg\" alt=\"Overhead view of cleat spacing and corrugated sidewall layout\" width=\"1024\" height=\"576\" decoding=\"async\"><\/figure>\n\n<p>LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/pvc-blue-flat-conveyor-belts-manufacturer\/\">blue PVC flat conveyor belt<\/a> illustrates a glossy blue carrying surface with a fabric underside. It is a starting reference for appearance and construction, <strong>not proof<\/strong> that any pictured grade is approved for a particular cleaning chemical, load or minimum pulley diameter.<\/p>\n<p>The <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/pu-transparent-food-conveyor-belt\/\">transparent PU conveyor belt range<\/a> provides separate model-level references. For example, its R-2M1712-FDA table entry lists 1.3 mm thickness, two layers and a 20 mm minimum pulley. Those figures belong to that named range entry; they do not automatically describe the photographed roll, a modified version, the finished joint or a different model. A custom assembly can impose additional limits that require supplier approval.<\/p>\n<p>If reinforcement or thickness changes from the original belt, check the load\u2013elongation behavior and available take-up. The <a href=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-reinforcement\/\">conveyor belt reinforcement guide<\/a> explains why two similar-looking belt bodies need not extend or bend alike. A replacement should not inherit the old installation tension merely because the width matches.<\/p>\n<h3 id=\"treat-operating-conditions-as-selection-inputs\">Treat operating conditions as selection inputs<\/h3>\n<p>Record conveyed product, normal and peak load, speed, start-stop duty, incline, moisture, heat, oil or chemical exposure and cleaning process. Distinguish direct food contact from conveying sealed packages. Request documentation for the <em>identified finished construction<\/em> if regulatory or customer specifications apply; a belt color or a model suffix is not itself evidence of compliance.<\/p>\n<p>Forbo&#8217;s <a href=\"https:\/\/www.forbo.com\/movement\/en-gl\/p0ft76\">fabrication overview<\/a> illustrates why profiles, perforations and splicing are distinct processing topics. Its available methods and materials are Forbo&#8217;s, not blanket specifications or confirmed capabilities of LKBELT.<\/p>\n<h2 id=\"translate-custom-features-into-drawing-dimensions\">Translate Custom Features Into Drawing Dimensions<\/h2>\n<p>A production-ready drawing should let an independent inspector locate every feature without comparing it visually to a photograph. Choose a width datum, a longitudinal start datum and a stated travel direction. Clearly label <strong>carrying face<\/strong>, <strong>running underside<\/strong>, <strong>left and right edges viewed in travel direction<\/strong>, and the location of the joint. Define all dimensions in a stated unit, rather than mixing millimeters and inches across drawings.<\/p>\n<h3 id=\"cleats-and-sidewalls\">Cleats and sidewalls<\/h3>\n<p>For transverse cleats, give the profile, height, thickness, count or pitch, orientation and edge offsets. For sidewalls, specify total outside width, clear usable width between walls, wall height, corrugation and each wall&#8217;s location. Include the machine&#8217;s loading, return and discharge clearance: a cleat that carries product on an incline may collide with a lower return roller or transfer guard.<\/p>\n<p>LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/pvc-blue-conveyor-belt-with-sidewall-and-baffle\/\">blue PVC belt with corrugated sidewalls and cleats<\/a> publicly shows such an assembly and requests the complete dimensional layout. Its pictured arrangement is evidence for the displayed product type; it is not evidence that every conceivable wall profile, weld method, pitch or allowable incline is offered.<\/p>\n<p>If identical cleats are to be equally spaced around a finished loop, the engineering drawing must settle the relationship between <strong>finished loop length, pitch and whole-number cleat count<\/strong>. For a single, uniform repeating row, the number of cleats \u00d7 the approved along-belt pitch must close around the defined pattern length. If the nominal pitch does not divide that length, the layout will leave a remainder. The drawing must identify whether an unequal closure gap, revised pitch or reserved splice zone is acceptable; those options are not interchangeable without the machine owner&#8217;s approval. Do not let the production shop decide this after the purchase order is issued.<\/p>\n<h3 id=\"underside-guides\">Underside guides<\/h3>\n<p>Show guide cross-section and orientation, its centerline offset from a defined belt edge, number of guides, and the mating groove path. Record clearance through every pulley, slider bed, return roller and splice. A guide helps with a specified tracking geometry; it cannot automatically correct a skewed conveyor frame or poor loading.<\/p>\n<p>When both guides and cleats are specified, show them on separate face views. Otherwise a drawing can look correct in plan view while the guide conflicts with a bed groove or joint preparation. The same rule applies to a replacement with two guide strips: identify which edge controls each position and how the installer establishes belt orientation.<\/p>\n<h3 id=\"holes-and-unprocessed-zones\">Holes and unprocessed zones<\/h3>\n<p>For a perforated belt, define hole shape and diameter, transverse and longitudinal pitch, row stagger, offsets to edges, count or coordinate pattern, and orientation relative to the vacuum or drainage zones. Mark <strong>no-hole zones<\/strong> around the splice and any attached guide or cleat where required by the approved construction. A hole pattern must be referenced to the actual conveyor bed or suction plate, not merely copied from a scaled product photograph.<\/p>\n<p>Perforation does not prove that a belt is suitable for a vacuum system. Hole placement affects the available belt material and may intersect the reinforcement or joint; the manufacturer must review the specific build. The vacuum source, suction-box design and holding performance remain matters for the equipment system and its responsible engineer.<\/p>\n<h2 id=\"specify-the-joint-as-part-of-the-finished-belt\">Specify the Joint as Part of the Finished Belt<\/h2>\n<p>A finished length is not the same as a raw cut length. State whether the order dimension is the <strong>finished endless circumference<\/strong> or another defined supplier measurement, and whether it was obtained from the OEM drawing, the installed belt or a removed sample. Include take-up position, available travel and any evidence of previous belt extension or repair.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/green-belt-cleat-fitting-lkbelt-blog-1024x492.jpg\" alt=\"Cleat fitting on green conveyor belting\" width=\"1024\" height=\"492\" decoding=\"async\"><\/figure>\n\n<p>The joint needs its own callout: joint method, position relative to the repeating features, local thickness and permitted bending. A mechanical fastener can introduce a different clearance and hygiene condition from a supplier-approved endless splice. A finger, step or lap joint may suit a particular construction but should never be selected by name alone. See LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/\">conveyor belt splice types<\/a> for the main joint families, then obtain the specific method approved for this belt.<\/p>\n<p><strong>Do not assume the joint has the same permitted pulley diameter as the unjoined belt body.<\/strong> The replacement must pass the smallest relevant pulley, any reverse bend, scraper and fixed support. A supplier should declare whether an attachment can cross the joint area and whether a joining process changes the local profile.<\/p>\n<p>For replacement jobs, the <a href=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-drive-types\/\">belt drive layout guide<\/a> is useful when a lower drive group adds bends or changes contact faces. The current machine drawing is still the final reference.<\/p>\n<h2 id=\"the-custom-belt-drawing-what-belongs-on-each-view\">The Custom Belt Drawing: What Belongs on Each View?<\/h2>\n<p>A single annotated sketch can work for a simple belt; more complex assemblies benefit from a small drawing set. The critical point is that each dimension has one agreed meaning.<\/p>\n<table>\n<thead>\n<tr>\n<th>Drawing or record<\/th>\n<th>Required content<\/th>\n<th>Error it prevents<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Assembly plan, carrying side<\/td>\n<td>Finished width and length reference; travel arrow; top texture; cleat or hole coordinates; joint index<\/td>\n<td>Reversed pattern, ambiguous starting position or misplaced attachment<\/td>\n<\/tr>\n<tr>\n<td>Underside plan<\/td>\n<td>Guide centerlines, groove-related references and contact face<\/td>\n<td>Guide built to the wrong edge or installed backward<\/td>\n<\/tr>\n<tr>\n<td>Cross-section<\/td>\n<td>Base construction, total thickness, top\/bottom orientation, wall and guide profiles<\/td>\n<td>Similar-looking but mechanically incompatible substitute<\/td>\n<\/tr>\n<tr>\n<td>Belt route<\/td>\n<td>All pulley diameters, reverse bends, support bed, take-up and clearances<\/td>\n<td>Joint or attachment colliding with a return component<\/td>\n<\/tr>\n<tr>\n<td>Approval record<\/td>\n<td>Drawing revision, approved sample ID, declared deviations, inspection method and sign-off<\/td>\n<td>A repeat order quietly changing the accepted assembly<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Do not fill the drawing with guessed tolerances. Identify which dimensions are functional and ask the fabricator to propose achievable tolerances for the <strong>specific process<\/strong>. A guide alignment dimension may be more critical to fit than the shade of the covering. The approval record should say which differences require customer authorization rather than treating every characteristic as equally important.<\/p>\n<h2 id=\"two-oem-examples-where-the-drawing-changes-the-decision\">Two OEM Examples: Where the Drawing Changes the Decision<\/h2>\n<h3 id=\"example-a-incline-belt-with-pockets\">Example A \u2014 Incline belt with pockets<\/h3>\n<p>Consider a hypothetical packaging conveyor carrying irregular small packs up an incline. The first request calls for a blue PVC belt with cleats and corrugated sidewalls. After reviewing the machine, the buyer learns that the return path passes a close-fitting guard and the loading chute has a narrow opening.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-1024x411.jpg\" alt=\"Finger splice detail on a conveyor belt\" width=\"1024\" height=\"411\" decoding=\"async\"><\/figure>\n\n<p>The correct next step is not simply to request taller cleats. Engineering must fix the usable pocket width, chute-to-cleat clearance, return-side wall clearance and joint location. A taller attachment could interfere with the return or trap product under the chute. The buyer can ask suppliers for a drawing showing the same assembly dimensions, rather than comparing offers with different wall geometry. The <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/anti-skid-food-grade-pvc-conveyor-belt-with-sidewall-cleat\/\">LKBELT sidewall and cleat product<\/a> is a visual reference for this type of construction, not an approved specification for the hypothetical machine.<\/p>\n<p>The decision is made when the finished belt and machine clearances are documented together. If no offered assembly satisfies the route, the equipment or belt design needs a separate review; a catalog picture cannot resolve it.<\/p>\n<h3 id=\"example-b-perforated-feeder-with-repeat-orders\">Example B \u2014 Perforated feeder with repeat orders<\/h3>\n<p>Consider a hypothetical paper-handling feeder that uses a belt with two staggered rows of holes. The existing belt runs acceptably, but the only replacement information is a worn sample and a photograph. A fabricator could reproduce the visible hole size and still shift the pattern relative to the machine&#8217;s suction-zone opening.<\/p>\n<p>Maintenance should recover the original machine drawing or measure the hole positions against machine datums under safe isolation. Purchasing needs the entire belt orientation, hole coordinates, splice exclusion area, joint and revision number. A first belt is checked against that reference, then its approved drawing and sample identifier become the repeat-order basis. Any later change in hole tool, base construction or position reference must be declared. This example demonstrates a specification process, <strong>not<\/strong> a claim that LKBELT supplies an approved vacuum feeder belt or the vacuum equipment.<\/p>\n<h2 id=\"how-to-approve-a-first-belt-before-reordering\">How to Approve a First Belt Before Reordering<\/h2>\n<p>An initial quote can identify material and processing possibilities, but it is not proof that the finished belt will fit. Use a staged approval:<\/p>\n<p><strong>Stage 1 \u2014 Drawing and feasibility review.<\/strong> Confirm the base-belt model, feature drawings, actual fabrication options, tolerances, joint and required documentation. Resolve unknowns and deviations in writing. If one supplier quotes a different base grade or moves the joint, evaluate that change rather than silently accepting the lowest price.<\/p>\n<p><strong>Stage 2 \u2014 First-belt dimensional inspection.<\/strong> Check the approved circumference reference, width, thickness where relevant, orientation, guide offsets, cleat\/sidewall positions, hole pattern and splice. Record actual measurements against agreed acceptance limits. Photographs can help identify construction, but they do not replace an agreed dimensional inspection.<\/p>\n<p><strong>Stage 3 \u2014 Fit and functional trial.<\/strong> With qualified personnel following the equipment procedure, verify installation, available take-up, tracking, joint passage, product contact and any application-specific clearance or cleaning requirement. These machine checks are approval conditions, not claims about a belt&#8217;s rated capacity or lifetime.<\/p>\n<p><strong>Stage 4 \u2014 Repeat-order control.<\/strong> Archive the drawing revision, base-belt identity, approved sample or batch reference, measured results, approved deviations and the supplier&#8217;s confirmed processing route. A later purchase order should cite this controlled reference. If a construction change is proposed, send it back through technical approval.<\/p>\n<p>This is where a custom belt differs commercially from a generic roll: buyers are paying for a <strong>repeatable installed assembly<\/strong>, not an attractive sample photograph.<\/p>\n<h2 id=\"what-to-send-with-a-custom-conveyor-belt-rfq\">What to Send With a Custom Conveyor Belt RFQ<\/h2>\n<p>A concise first inquiry can be completed without a perfect CAD package, provided unknowns are clearly identified. Supply the following in one folder:<\/p>\n<ul>\n<li><strong>Machine identity:<\/strong> manufacturer, model, machine position, original belt code and available drawing revision.<\/li>\n<li><strong>Belt body:<\/strong> proposed or existing material grade, carrying face, underside, reinforcement, width, finished length basis and total thickness.<\/li>\n<li><strong>Feature layout:<\/strong> two-face drawings with cleat, sidewall, guide or perforation datums; repeat pitch and splice location.<\/li>\n<li><strong>Conveyor interface:<\/strong> pulleys, return route, support bed, guide grooves, take-up, access and contact-face orientation.<\/li>\n<li><strong>Operating conditions:<\/strong> product dimensions and handling behavior, speed, load, duty, environment and cleaning or food-contact requirements.<\/li>\n<li><strong>Approval and order:<\/strong> quantity, sample requirement, critical tolerances to be agreed, allowable alternatives, documentation, lead time and who signs off deviations.<\/li>\n<\/ul>\n<p>If the supplier cannot verify a needed fabrication, material or tolerance, record it as <strong>pending technical confirmation<\/strong>. Do not turn an unapproved inquiry into a statement that a custom feature is already available. The industrial belt <a href=\"https:\/\/www.lkbelt.com\/zh\/industrial-belt-faq-insight-to-guide-for-conveyor-transmission-more\/\">ordering FAQ<\/a> confirms that LKBELT reviews custom requests using application, dimensions and quantity; exact product capability remains case-specific.<\/p>\n<h2 id=\"frequently-asked-questions\">Frequently Asked Questions<\/h2>\n<h3 id=\"can-a-custom-conveyor-belt-be-ordered-from-width-and-circumference-alone\">Can a custom conveyor belt be ordered from width and circumference alone?<\/h3>\n<p>Only for an assembly whose other specifications are already controlled. For a replacement or modified belt, also verify surfaces, reinforcement, joint, features, pulley route and the approved length reference.<\/p>\n<h3 id=\"how-should-i-specify-cleat-spacing-around-an-endless-belt\">How should I specify cleat spacing around an endless belt?<\/h3>\n<p>Define the finished loop reference, cleat count or target pitch, joint index and any restricted zones. The supplier and equipment engineer must agree how the pattern closes around the loop, taking account of any splice exclusion zone; do not assume the proposed pitch fits an integer number of times.<\/p>\n<h3 id=\"are-pvc-and-pu-conveyor-belts-interchangeable-if-their-dimensions-match\">Are PVC and PU conveyor belts interchangeable if their dimensions match?<\/h3>\n<p>No. Compare specific base grades and complete assemblies, including the underside, reinforcement, cleaning conditions, permissible bends and joint. Polymer labels alone do not establish compatibility.<\/p>\n<h3 id=\"does-a-perforated-belt-automatically-work-as-a-vacuum-belt\">Does a perforated belt automatically work as a vacuum belt?<\/h3>\n<p>No. Hole position and construction must match the vacuum bed and equipment duty. The installed system determines the actual hold-down requirement.<\/p>\n<h3 id=\"can-every-fabrication-option-shown-by-another-supplier-be-ordered-from-lkbelt\">Can every fabrication option shown by another supplier be ordered from LKBELT?<\/h3>\n<p>Not on that evidence. Ask LKBELT to review the identified base belt, drawing, material and processing request, and obtain written confirmation of what can be supplied and approved.<\/p>\n<h2 id=\"conclusion\">Conclusion<\/h2>\n<p>The best custom conveyor belt specification is one that a fabricator can build, an inspector can measure and a maintenance team can fit without guessing. Control the base-belt grade, both faces, feature coordinates, joint, machine route and approval criteria under one revision.<\/p>\n<p>For an LKBELT custom conveyor belt inquiry, send the old belt reference or sample, a two-face dimensioned sketch, the pulley and support layout, operating conditions and the required quantity. Resolve feasibility and tolerances before approving a sample; preserve the signed-off assembly reference for repeat orders.<\/p>","protected":false},"excerpt":{"rendered":"<p>A packaging machine needs a nonstandard endless belt. The first supplier offers the correct width and color, but its joint [&hellip;]<\/p>","protected":false},"author":1,"featured_media":6771,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[309],"tags":[],"class_list":["post-7095","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-news"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Custom Conveyor Belts: Drawing &amp; OEM Buying Guide<\/title>\n<meta name=\"description\" content=\"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lkbelt.com\/zh\/custom-conveyor-belt-specification-guide\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Custom Conveyor Belts: Drawing &amp; OEM Buying Guide\" \/>\n<meta property=\"og:description\" content=\"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lkbelt.com\/zh\/custom-conveyor-belt-specification-guide\/\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=100065289171531\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-21T07:45:03+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"1440\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"LKBELT Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u4f5c\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"LKBELT Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/\"},\"author\":{\"name\":\"LKBELT Team\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\"},\"headline\":\"Custom Conveyor Belts: Drawings, Fabrication Options and OEM Approval\",\"datePublished\":\"2026-11-21T07:45:03+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/\"},\"wordCount\":2669,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg\",\"articleSection\":[\"Industry News\"],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/\",\"name\":\"Custom Conveyor Belts: Drawing & OEM Buying Guide\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg\",\"datePublished\":\"2026-11-21T07:45:03+00:00\",\"description\":\"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg\",\"width\":2560,\"height\":1440,\"caption\":\"default\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/custom-conveyor-belt-specification-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Industry News\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/category\\\/industry-news\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Custom Conveyor Belts: Drawings, Fabrication Options and OEM Approval\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"name\":\"lkbelt\",\"description\":\"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lkbelt.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\",\"name\":\"lkbelt\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"width\":200,\"height\":200,\"caption\":\"lkbelt\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=100065289171531\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\",\"name\":\"LKBELT Team\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"caption\":\"LKBELT Team\"},\"sameAs\":[\"https:\\\/\\\/www.lkbelt.com\\\/\"],\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/zh\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Custom Conveyor Belts: Drawing & OEM Buying Guide","description":"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lkbelt.com\/zh\/custom-conveyor-belt-specification-guide\/","og_locale":"zh_CN","og_type":"article","og_title":"Custom Conveyor Belts: Drawing & OEM Buying Guide","og_description":"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.","og_url":"https:\/\/www.lkbelt.com\/zh\/custom-conveyor-belt-specification-guide\/","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=100065289171531","article_published_time":"2026-11-21T07:45:03+00:00","og_image":[{"width":2560,"height":1440,"url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg","type":"image\/jpeg"}],"author":"LKBELT Team","twitter_card":"summary_large_image","twitter_misc":{"\u4f5c\u8005":"LKBELT Team","\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4":"13 \u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#article","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/"},"author":{"name":"LKBELT Team","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1"},"headline":"Custom Conveyor Belts: Drawings, Fabrication Options and OEM Approval","datePublished":"2026-11-21T07:45:03+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/"},"wordCount":2669,"publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"image":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg","articleSection":["Industry News"],"inLanguage":"zh-Hans"},{"@type":"WebPage","@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/","url":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/","name":"Custom Conveyor Belts: Drawing & OEM Buying Guide","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#primaryimage"},"image":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg","datePublished":"2026-11-21T07:45:03+00:00","description":"Learn how to specify custom conveyor belts with accurate drawings, cleat and guide positions, joint details and first-belt approval for OEM orders.","breadcrumb":{"@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#breadcrumb"},"inLanguage":"zh-Hans","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/"]}]},{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#primaryimage","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/lkbelt-sidewall-cleat-sample-arrangements-scaled.jpg","width":2560,"height":1440,"caption":"default"},{"@type":"BreadcrumbList","@id":"https:\/\/www.lkbelt.com\/custom-conveyor-belt-specification-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.lkbelt.com\/"},{"@type":"ListItem","position":2,"name":"Industry News","item":"https:\/\/www.lkbelt.com\/category\/industry-news\/"},{"@type":"ListItem","position":3,"name":"Custom Conveyor Belts: Drawings, Fabrication Options and OEM Approval"}]},{"@type":"WebSite","@id":"https:\/\/www.lkbelt.com\/#website","url":"https:\/\/www.lkbelt.com\/","name":"lkbelt","description":"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios","publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lkbelt.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"zh-Hans"},{"@type":"Organization","@id":"https:\/\/www.lkbelt.com\/#organization","name":"lkbelt","url":"https:\/\/www.lkbelt.com\/","logo":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","width":200,"height":200,"caption":"lkbelt"},"image":{"@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=100065289171531"]},{"@type":"Person","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1","name":"LKBELT Team","image":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","caption":"LKBELT Team"},"sameAs":["https:\/\/www.lkbelt.com\/"],"url":"https:\/\/www.lkbelt.com\/zh\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7095","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/comments?post=7095"}],"version-history":[{"count":1,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7095\/revisions"}],"predecessor-version":[{"id":7099,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7095\/revisions\/7099"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media\/6771"}],"wp:attachment":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media?parent=7095"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/categories?post=7095"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/tags?post=7095"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}