{"id":7094,"date":"2026-11-21T02:44:54","date_gmt":"2026-11-21T07:44:54","guid":{"rendered":"https:\/\/www.lkbelt.com\/?p=7094"},"modified":"2026-11-21T02:44:54","modified_gmt":"2026-11-21T07:44:54","slug":"how-to-identify-a-v-belt","status":"publish","type":"post","link":"https:\/\/www.lkbelt.com\/zh\/how-to-identify-a-v-belt\/","title":{"rendered":"How to Identify a V-Belt: Worn Markings, Drive Checks and Replacement Specifications"},"content":{"rendered":"<p>An industrial fan drive stops unexpectedly, and the removed V-belt has almost no readable print. The stores team has several belts that look similar, but their section codes and length conventions are different. Ordering by the old belt&#8217;s apparent width could leave the sheave grooves, tensioning range or duty unmatched.<\/p>\n<p><strong>To identify a V-belt, record any surviving marking, determine its cross-section and construction, confirm the length reference, and compare the candidate with the actual pulley drive.<\/strong> A worn belt&#8217;s dimensions provide evidence, not a guaranteed original part number. For industrial replacement, use the equipment drawing or service record to resolve uncertainty before approving a substitute.<\/p>\n<p>This guide focuses on <strong>how to identify a V-belt when its marking is worn, missing or inconsistent with a supplier catalogue<\/strong>. It is a step-by-step troubleshooting and replacement-identification workflow, not another dimensions chart. For nominal profiles and series-specific length conversions, use LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/v-belt-size-chart\/\">industrial V-belt size chart<\/a> instead.<\/p>\n<h2 id=\"start-with-the-drive-record-not-the-loose-belt\">Start With the Drive Record, Not the Loose Belt<\/h2>\n<p>Before measuring, check the equipment asset number, OEM parts list, service manual, previous purchase orders and any spare-belt packaging. Note which evidence is confirmed and which is only a recollection or unverified cross-reference. A partial code in a maintenance record may be more useful than a complete measurement of a badly worn belt. If a belt has failed repeatedly, record whether the last replacement was an approved match or an undocumented substitute.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/10\/LKBELT-01_Image-2_V-Belt-Cross-Section-1024x576.webp\" alt=\"Diagram of a V-belt cross-section\" width=\"1024\" height=\"576\" decoding=\"async\"><\/figure>\n\n<p>The identification process should be performed with the drive isolated, guarded access controlled and site-specific energy-control procedures followed. <strong>Never inspect or measure a belt while the sheaves are turning.<\/strong> Qualified personnel should record the pulley configuration and make any removal or tension changes according to the equipment manufacturer. A replacement request is not permission to increase tension or alter the sheave arrangement.<\/p>\n<p>Photograph the complete drive before dismantling where safe. Capture the motor and driven-machine references, belt path, number of grooves, take-up or adjustment position, and any existing identification plate. If a shaft, pulley or motor was changed since the original installation, the historical belt part number may no longer describe the current arrangement.<\/p>\n<h2 id=\"step-1-recover-and-interpret-the-original-v-belt-marking\">Step 1 \u2014 Recover and Interpret the Original V-Belt Marking<\/h2>\n<p>Look for print on the outer back of the belt and for tags, packaging, machine records or a matching spare. Record the <strong>entire string<\/strong> exactly, including brand, series, letters, numbers, suffixes, units and any symbols. Photograph what remains rather than guessing an unreadable character.<\/p>\n<p>A section code such as A, B, SPB or 5V refers to a recognized profile designation <strong>in its applicable standard and manufacturer product family<\/strong>. A number after the code may encode a length, but the relevant reference may be inside, outside, datum or effective length. It is unsafe to interpret a bare <code>800<\/code>, <code>50<\/code> or <code>2000<\/code> without the original family and convention.<\/p>\n<p>For example, an <code>AX<\/code> label commonly denotes a classical raw-edge cogged construction in the relevant product ranges, whereas <code>A<\/code> typically identifies a classical section. That resemblance does not prove the two are interchangeable for a particular drive. A belt marked <code>SPB<\/code> must not be treated as a classical <code>B<\/code> merely because the worn sample seems similar in width; the profile and pulley groove families differ.<\/p>\n<p>Megadyne&#8217;s <a href=\"https:\/\/megadynegroup.com\/en-us\/blog\/how-to-identify-a-v-belt\/\">V-belt identification guide<\/a> correctly begins with the surviving print and then turns to cross-section, construction and length when identification is incomplete. The additional purchasing task is to connect those observations to the drive and to mark any unconfirmed item explicitly.<\/p>\n<h2 id=\"step-2-identify-the-cross-section-without-guessing-a-standard\">Step 2 \u2014 Identify the Cross-Section Without Guessing a Standard<\/h2>\n<p>The V profile is a trapezoid: the wider top sits above two working flanks that engage the sheave groove. Record the top width across the belt, its vertical height, the sidewall condition and the apparent section family. Use a suitable caliper or profile gauge and document the measurement location and tool. Avoid reading a width from a frayed edge or a compressed area.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/10\/types-of-industrial-v-belts-1024x576.jpg\" alt=\"Industrial V-belt construction examples\" width=\"1024\" height=\"576\" decoding=\"async\"><\/figure>\n\n<p><strong>A used belt may have worn sidewalls, a distorted top, glazing or material loss.<\/strong> A measured section therefore helps shortlist candidate profiles; it does not certify the original nominal dimensions. Ask maintenance to inspect the matching sheaves for wear or incorrect groove geometry. If the pulley groove is damaged or unidentified, ordering the correct belt section alone may not solve the drive issue.<\/p>\n<p>Classical sections (such as A\/B\/C) and narrow or wedge families (including SPZ\/SPA\/SPB\/SPC and 3V\/5V\/8V in different systems) require their own pulley-groove review. The manufacturer\u2019s <a href=\"https:\/\/megadynegroup.com\/en-us\/products\/v-belts\/\">published V-belt family overview<\/a> illustrates why cross-section codes and construction families must be read together. Similar measurements across families can be misleading. The <a href=\"https:\/\/www.lkbelt.com\/zh\/types-of-v-belts\/\">types of industrial V-belts<\/a> guide explains the families; use the original drawing or a verified manufacturer profile chart to choose among them.<\/p>\n<p>LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/abcde-wrappedclassical-cogged-rubber-v-belt\/\">rubber V-belt range<\/a> publishes raw-edge section examples such as AX <strong>13 \u00d7 8 mm<\/strong> and BX <strong>17 \u00d7 11 mm<\/strong> (top width \u00d7 height), alongside HM, CX, DX and EX entries. Those are <strong>named LKBELT product-page values<\/strong>, not a universal profile chart or proof that a particular worn belt belongs to that construction. In the same supplier table, HM is 10.5 \u00d7 8 mm; do not silently equate it with a separately named M profile.<\/p>\n<h2 id=\"step-3-examine-construction-not-just-the-section\">Step 3 \u2014 Examine Construction, Not Just the Section<\/h2>\n<p>Remove dirt only by an approved inspection method and inspect the belt&#8217;s top, sides and inner surface. A wrapped belt normally has a fabric envelope over its exterior. A raw-edge belt exposes its working sidewalls. A raw-edge cogged belt also has transverse notches on its inner surface that help the belt bend. These <strong>cogs are not timing-belt teeth<\/strong>; a V-belt still transmits power primarily through friction on the groove sidewalls.<\/p>\n<p>Check whether the drive originally used single belts, a joined banded set or a special linked construction. A banded belt is more than several loose belts delivered together; its interconnected construction must match the sheave set and clearance. For a multi-groove drive using separate belts, document the specified matching requirements and replace the set according to the OEM procedure, not by mixing an unknown used belt with new stock.<\/p>\n<p>Examine the sides and underside for glazing, cracks, deep wear, missing notches, exposed cord or evidence that the belt has been running against the groove bottom. These are maintenance observations, <strong>not diagnostic proof<\/strong> of the root cause. Misalignment, incorrect tension, unsuitable sheave grooves, contamination or overload may require separate investigation. Do not infer the rubber compound, cord material, thermal rating or static-dissipating property from colour or appearance.<\/p>\n<p>LKBELT&#8217;s rubber V-belt page describes construction options including polyester tensile cords and CR or EPDM bottom rubber depending on construction. The exact compound and finished product properties must be confirmed for the chosen series, rather than transferred from a generic catalogue description.<\/p>\n<h2 id=\"step-4-treat-length-as-a-referenced-dimension\">Step 4 \u2014 Treat Length as a Referenced Dimension<\/h2>\n<p>Length is frequently the most uncertain part of a replacement request. Industrial V-belts can be designated using <strong>inside length (Li), outside length (La), datum or pitch length (Ld\/Lp), or effective length (Le)<\/strong>. The actual meaning varies by profile, standard and manufacturer series. A field measurement around the outside of a worn loop does not automatically provide the correct ordering number.<\/p>\n<figure class=\"wp-block-image lkbelt-blog-photo\"><img loading=\"lazy\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/01\/v-belt-3-LG.jpg\" alt=\"V-belt reference image\" width=\"800\" height=\"609\" decoding=\"async\"><\/figure>\n\n<p>When the old belt is intact, record the measurement method, whether it was relaxed, and the physical surface followed. When the belt is broken, note any missing material or previous repair; adding the visible pieces together is at best an estimate. Accurate standardized belt-length verification may need a prescribed two-pulley measurement fixture and a defined test tension, as explained in Megadyne&#8217;s identification guidance.<\/p>\n<p>Where an OEM drawing or previous approved part reference exists, use it as the primary baseline and compare the measured sample against it. Record centre distance, pulley diameters and the current adjustment position to help the equipment team check whether the proposed replacement can be fitted within its take-up range.<\/p>\n<p><strong>Do not apply one universal offset to convert all V-belt lengths.<\/strong> The relationships in LKBELT&#8217;s <a href=\"https:\/\/www.lkbelt.com\/zh\/v-belt-size-chart\/\">V-belt measurement and length-reference chart<\/a> apply to specified classical profiles. They must not be exported to an SPB, 5V, automotive or special-section belt without the appropriate manufacturer documentation. If the length convention is unresolved, label the candidate as provisional and request cross-reference confirmation.<\/p>\n<h2 id=\"step-5-verify-the-pulley-drive-and-operating-duty\">Step 5 \u2014 Verify the Pulley Drive and Operating Duty<\/h2>\n<p>Identification becomes a replacement specification only when the proposed belt is checked against the machine. Obtain the pulley groove family, number of grooves, small and large sheave diameters, centre distance, alignment condition and the available installation adjustment. Note whether the drive uses a single direction, frequent starts, reversing, shock loads or continuous service.<\/p>\n<p>The V-belt flanks must work with the corresponding pulley groove. A candidate can have a plausible top width yet sit at the wrong depth or contact the groove improperly. Replacing the belt without correcting a badly worn or mismatched pulley may reproduce rapid wear or slipping. Belt power rating and minimum pulley diameter also depend on the <strong>specific belt series<\/strong>, working speed and service factor; do not invent these from an unlabelled sample.<\/p>\n<p>For a plant with multiple fans or pumps, keep each drive&#8217;s belt position and approved set reference separate. Two machines can use visually similar belts yet have different adjustment travel or load demands. If procurement proposes a new brand, construction or profile, the equipment owner should approve the exact alternative and its installation procedure.<\/p>\n<h3 id=\"an-identification-evidence-table-for-maintenance-and-purchasing\">An Identification Evidence Table for Maintenance and Purchasing<\/h3>\n<table>\n<thead>\n<tr>\n<th>Evidence from the machine<\/th>\n<th>What it can establish<\/th>\n<th>What it cannot prove alone<\/th>\n<th>Next confirmation<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Complete original marking and OEM record<\/td>\n<td>Manufacturer family and candidate designation<\/td>\n<td>Correct fit after undocumented pulley changes<\/td>\n<td>Current drive drawing and approved cross-reference<\/td>\n<\/tr>\n<tr>\n<td>Partial marking plus top width and height<\/td>\n<td>Possible profile families<\/td>\n<td>Original nominal section or construction<\/td>\n<td>Manufacturer section chart and sheave groove<\/td>\n<\/tr>\n<tr>\n<td>Wrapped surface or raw-edge\/cogged underside<\/td>\n<td>Observable construction style<\/td>\n<td>Cord grade, compound or performance rating<\/td>\n<td>Product-series data and duty approval<\/td>\n<\/tr>\n<tr>\n<td>Measured old-loop circumference<\/td>\n<td>Approximate length evidence<\/td>\n<td>Standard Li, La, Ld or Le designation<\/td>\n<td>OEM number or series-specific measurement method<\/td>\n<\/tr>\n<tr>\n<td>Number of sheave grooves<\/td>\n<td>Belt count or banded arrangement to investigate<\/td>\n<td>Matching or allowable substitution<\/td>\n<td>OEM set requirement, drive geometry and purchase record<\/td>\n<\/tr>\n<tr>\n<td>Wear pattern, tensioner travel and pulley condition<\/td>\n<td>Maintenance questions for replacement<\/td>\n<td>Root cause or approved new tension<\/td>\n<td>Qualified drive inspection and service procedure<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The purpose of this matrix is to make uncertainty visible. A supplier should receive both the observed data and the unanswered questions, not an apparently precise part number assembled from guesses.<\/p>\n<h2 id=\"two-industrial-replacement-scenarios\">Two Industrial Replacement Scenarios<\/h2>\n<h3 id=\"scenario-a-an-unmarked-belt-on-a-workshop-ventilation-fan\">Scenario A \u2014 An Unmarked Belt on a Workshop Ventilation Fan<\/h3>\n<p>A maintenance technician removes a damaged belt from a fan drive. The nameplate identifies the fan, but the rubber marking has disappeared. The top width resembles more than one familiar section; a colleague suggests ordering the closest stock size.<\/p>\n<p>Under the approved isolation procedure, the team records the sheave grooves, belt path and take-up setting, then compares the worn section against the OEM parts list and a verified profile chart. They photograph the original construction and record whether the inner face is cogged. The measured loop is described as an <strong>approximation<\/strong>, because wear and an unknown length convention remain unresolved.<\/p>\n<p>Purchasing then requests a candidate replacement with the confirmed profile, construction and specified length reference. If the existing pulleys do not match the documentation, maintenance resolves that discrepancy before the order is approved. The result is not a made-up belt size; it is a traceable decision.<\/p>\n<h3 id=\"scenario-b-similar-looking-belts-across-two-pump-drives\">Scenario B \u2014 Similar-Looking Belts Across Two Pump Drives<\/h3>\n<p>A facility maintains two adjacent pump sets. Their used belts appear similar, and purchasing wants to combine spare inventory. One drive previously used a wrapped belt, while the other service record lists a raw-edge cogged construction. Their pulleys and adjustment ranges have not been compared.<\/p>\n<p>The buyer keeps the two asset references separate and requests groove drawings, full part numbers, belt counts and duty data. The supplier assesses whether either approved product can satisfy both installations. Until engineering accepts a common configuration, the stores team must not relabel one spare as a universal substitute. If an alternative is approved, record its exact series and test or acceptance conditions for future orders.<\/p>\n<p>Both examples are hypothetical. They illustrate evidence handling and supplier approval, not completed LKBELT customer projects.<\/p>\n<h2 id=\"what-should-buyers-include-in-a-v-belt-replacement-rfq\">What Should Buyers Include in a V-Belt Replacement RFQ?<\/h2>\n<p>An RFQ can begin with partial information, but an approved production order should resolve all critical fit questions. Send:<\/p>\n<ol>\n<li><strong>Equipment identity:<\/strong> machine and motor models, asset number, OEM drawing revision and any known original belt or spare part code.<\/li>\n<li><strong>Marking evidence:<\/strong> legible belt print, brand, complete numbers and suffixes, plus photographs of the top, flanks, inner surface and packaging.<\/li>\n<li><strong>Measured section:<\/strong> top width, height, tool used, measurement locations and condition of the old belt.<\/li>\n<li><strong>Construction:<\/strong> wrapped, raw-edge, cogged, banded or linked as observed; specify what is confirmed versus suspected.<\/li>\n<li><strong>Length:<\/strong> measured value, units, measuring surface and whether the required order reference is Li, La, Ld\/Lp or Le.<\/li>\n<li><strong>Drive geometry:<\/strong> pulley groove type, groove count, pulley diameters, centre distance, adjustment range and any abnormal groove wear.<\/li>\n<li><strong>Operating requirements:<\/strong> power, rotational speed, direction, starting and shock loads, working environment and OEM tension requirements.<\/li>\n<li><strong>Order and approval:<\/strong> quantity, matched-set requirements, supplier cross-reference evidence, permitted deviations and the person authorised to approve a different series.<\/li>\n<\/ol>\n<p>LKBELT lists <a href=\"https:\/\/www.lkbelt.com\/zh\/product-category\/high-speed-transmission-belt\/v-belt\/\">industrial V-belt products<\/a> and a <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/abcde-wrappedclassical-cogged-rubber-v-belt\/\">rubber classical\/raw-edge range<\/a> as starting references. Supply an original part number and machine details; the public range does not establish that every OEM cross-reference, matched-set grade or special compound is available without confirmation.<\/p>\n<p>For a first replacement or an approved alternative, the receiving and maintenance teams should verify the label against the purchase specification, compare belt and pulley profile, check the relevant length convention and follow the OEM procedure for fitting, alignment and tension. Qualified personnel should conduct the authorised run check and document any tracking, slip, vibration or heat observation before releasing repeat orders.<\/p>\n<h2 id=\"frequently-asked-questions\">Frequently Asked Questions<\/h2>\n<h3 id=\"how-do-i-identify-a-v-belt-if-the-printing-is-gone\">How do I identify a V-belt if the printing is gone?<\/h3>\n<p>Collect the drive&#8217;s OEM part reference, measure the old belt&#8217;s profile, identify its wrapped or raw-edge\/cogged construction and record a referenced length measurement. Use the actual pulley groove and supplier cross-reference to confirm the replacement.<\/p>\n<h3 id=\"can-i-identify-a-belt-from-its-top-width-alone\">Can I identify a belt from its top width alone?<\/h3>\n<p>No. Worn dimensions and similar-looking classical or wedge sections can be misleading. Confirm height, construction, groove geometry, full series and length designation.<\/p>\n<h3 id=\"do-the-notches-on-a-cogged-v-belt-engage-pulley-teeth\">Do the notches on a cogged V-belt engage pulley teeth?<\/h3>\n<p>No. Those notches help the belt flex; they do not make a conventional V-belt a synchronous timing belt. If the machine uses a toothed belt and toothed pulleys, use the relevant <a href=\"https:\/\/www.lkbelt.com\/zh\/industrial-timing-belt-guide\/\">industrial timing belt guide<\/a> instead.<\/p>\n<h3 id=\"is-outside-circumference-the-same-as-a-v-belt-part-number\">Is outside circumference the same as a V-belt part number?<\/h3>\n<p>Not universally. Different product lines use different inside, outside, datum, pitch or effective length conventions. Document the measurement and confirm the manufacturer&#8217;s designation.<\/p>\n<h3 id=\"can-an-ax-belt-replace-an-a-belt\">Can an AX belt replace an A belt?<\/h3>\n<p>Not on the designation alone. The candidate&#8217;s construction, sheave compatibility, duty and OEM approval must be checked, even if published nominal cross-section values look similar.<\/p>\n<h3 id=\"should-multiple-belts-on-the-same-drive-be-replaced-as-a-set\">Should multiple belts on the same drive be replaced as a set?<\/h3>\n<p>Follow the equipment manufacturer&#8217;s matching and replacement requirements. Record belt count, series and matched-set needs in the RFQ; do not mix unverified used and new belts.<\/p>\n<h2 id=\"conclusion\">Conclusion<\/h2>\n<p>Identify an unknown V-belt by assembling the <strong>full marking, profile, construction, referenced length and machine evidence<\/strong>. A worn belt can help narrow the search, but it should not become the sole authority for an industrial replacement order.<\/p>\n<p>For LKBELT review, send the original marking or photographs, equipment reference, measured section and length method, sheave geometry and operating duty. The aim is a traceable, approved replacement specification\u2014not simply the closest-looking belt on the shelf.<\/p>","protected":false},"excerpt":{"rendered":"<p>An industrial fan drive stops unexpectedly, and the removed V-belt has almost no readable print. The stores team has several [&hellip;]<\/p>","protected":false},"author":1,"featured_media":2514,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[309],"tags":[],"class_list":["post-7094","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-news"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>How to Identify a V-Belt: Markings &amp; Replacement<\/title>\n<meta name=\"description\" content=\"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lkbelt.com\/zh\/how-to-identify-a-v-belt\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Identify a V-Belt: Markings &amp; Replacement\" \/>\n<meta property=\"og:description\" content=\"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lkbelt.com\/zh\/how-to-identify-a-v-belt\/\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=100065289171531\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-21T07:44:54+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"450\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"LKBELT Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u4f5c\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"LKBELT Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/\"},\"author\":{\"name\":\"LKBELT Team\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\"},\"headline\":\"How to Identify a V-Belt: Worn Markings, Drive Checks and Replacement Specifications\",\"datePublished\":\"2026-11-21T07:44:54+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/\"},\"wordCount\":2605,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/20181106030357214.jpg\",\"articleSection\":[\"Industry News\"],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/\",\"name\":\"How to Identify a V-Belt: Markings & Replacement\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/20181106030357214.jpg\",\"datePublished\":\"2026-11-21T07:44:54+00:00\",\"description\":\"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/20181106030357214.jpg\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/20181106030357214.jpg\",\"width\":450,\"height\":450,\"caption\":\"Black belt loops gathered by a narrow red band\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/how-to-identify-a-v-belt\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Industry News\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/category\\\/industry-news\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"How to Identify a V-Belt: Worn Markings, Drive Checks and Replacement Specifications\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"name\":\"lkbelt\",\"description\":\"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lkbelt.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\",\"name\":\"lkbelt\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"width\":200,\"height\":200,\"caption\":\"lkbelt\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=100065289171531\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\",\"name\":\"LKBELT Team\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"caption\":\"LKBELT Team\"},\"sameAs\":[\"https:\\\/\\\/www.lkbelt.com\\\/\"],\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/zh\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Identify a V-Belt: Markings & Replacement","description":"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lkbelt.com\/zh\/how-to-identify-a-v-belt\/","og_locale":"zh_CN","og_type":"article","og_title":"How to Identify a V-Belt: Markings & Replacement","og_description":"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.","og_url":"https:\/\/www.lkbelt.com\/zh\/how-to-identify-a-v-belt\/","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=100065289171531","article_published_time":"2026-11-21T07:44:54+00:00","og_image":[{"width":450,"height":450,"url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg","type":"image\/jpeg"}],"author":"LKBELT Team","twitter_card":"summary_large_image","twitter_misc":{"\u4f5c\u8005":"LKBELT Team","\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4":"13 \u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#article","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/"},"author":{"name":"LKBELT Team","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1"},"headline":"How to Identify a V-Belt: Worn Markings, Drive Checks and Replacement Specifications","datePublished":"2026-11-21T07:44:54+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/"},"wordCount":2605,"publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"image":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg","articleSection":["Industry News"],"inLanguage":"zh-Hans"},{"@type":"WebPage","@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/","url":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/","name":"How to Identify a V-Belt: Markings & Replacement","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#primaryimage"},"image":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg","datePublished":"2026-11-21T07:44:54+00:00","description":"Learn how to identify a V-belt with worn markings using its cross-section, construction, length reference and pulley checks before ordering a replacement.","breadcrumb":{"@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#breadcrumb"},"inLanguage":"zh-Hans","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/"]}]},{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#primaryimage","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/20181106030357214.jpg","width":450,"height":450,"caption":"Black belt loops gathered by a narrow red band"},{"@type":"BreadcrumbList","@id":"https:\/\/www.lkbelt.com\/how-to-identify-a-v-belt\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.lkbelt.com\/"},{"@type":"ListItem","position":2,"name":"Industry News","item":"https:\/\/www.lkbelt.com\/category\/industry-news\/"},{"@type":"ListItem","position":3,"name":"How to Identify a V-Belt: Worn Markings, Drive Checks and Replacement Specifications"}]},{"@type":"WebSite","@id":"https:\/\/www.lkbelt.com\/#website","url":"https:\/\/www.lkbelt.com\/","name":"lkbelt","description":"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios","publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lkbelt.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"zh-Hans"},{"@type":"Organization","@id":"https:\/\/www.lkbelt.com\/#organization","name":"lkbelt","url":"https:\/\/www.lkbelt.com\/","logo":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","width":200,"height":200,"caption":"lkbelt"},"image":{"@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=100065289171531"]},{"@type":"Person","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1","name":"LKBELT Team","image":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","caption":"LKBELT Team"},"sameAs":["https:\/\/www.lkbelt.com\/"],"url":"https:\/\/www.lkbelt.com\/zh\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7094","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/comments?post=7094"}],"version-history":[{"count":1,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7094\/revisions"}],"predecessor-version":[{"id":7098,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/7094\/revisions\/7098"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media\/2514"}],"wp:attachment":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media?parent=7094"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/categories?post=7094"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/tags?post=7094"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}