{"id":6944,"date":"2026-11-13T04:02:59","date_gmt":"2026-11-13T09:02:59","guid":{"rendered":"https:\/\/www.lkbelt.com\/?p=6944"},"modified":"2026-11-13T04:03:01","modified_gmt":"2026-11-13T09:03:01","slug":"conveyor-belt-splice-types","status":"publish","type":"post","link":"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/","title":{"rendered":"Conveyor Belt Splice Types: Finger, Lap and Mechanical Joints"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Two replacement belts can match the original width, length and cover material yet behave differently at a small transfer. A change in splice thickness or flexibility can affect clearance. Even a joint that suits the route may require a different installation plan if the conveyor cannot accept a closed loop.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"683\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-1024x683.jpg\" alt=\"Rolled black industrial conveyor belt samples showing fabric-backed surfaces and layered edges\" class=\"wp-image-6946\" srcset=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-1024x683.jpg 1024w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-300x200.jpg 300w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-768x512.jpg 768w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-18x12.jpg 18w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide-600x400.jpg 600w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-splice-types-guide.jpg 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Choose among conveyor belt splice types by checking the exact belt construction, the full pulley route and the available installation access.<\/strong> Specify how the ends are prepared, how they are joined and how the belt will arrive. Then verify that the finished joint can carry the required load and pass the machine&#8217;s bends, supports and clearances.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Are Conveyor Belt Splice Types?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A conveyor belt splice joins belt ends to form an endless loop or a suitable serviceable connection. A quotation may describe that connection in three ways:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Geometry<\/strong> describes the prepared ends, such as interlocking fingers, a tapered wedge or an overlap with steps in the layers.<\/li>\n\n\n\n<li><strong>Joining process<\/strong> describes how the connection is made. Examples include thermoplastic fusion, adhesive bonding and mechanical fastening. A hot press can provide heat and pressure in different approved processes, so ask which process the supplier proposes.<\/li>\n\n\n\n<li><strong>Supply form<\/strong> describes how the belt reaches the machine. A belt may arrive as a closed loop, as an open belt prepared for field joining, or with an approved connection that can be opened for installation.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For example, a finger geometry can be fused into a closed loop before delivery or joined at the machine if the supplier approves field fabrication. Specify the finished geometry and the installation plan on the same order. Forbo&#8217;s guide illustrates how end preparation and the joining process are documented separately for its belt systems. <a href=\"https:\/\/www.forbo.com\/movement\/en-gl\/splicing\/splice-types-guide\/pe2cct\">Forbo Splice Types Guide<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How Does a Finger Splice Work?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The prepared ends fit together in a series of fingers. This shape distributes the connection across a longer interface than a straight cross-belt seam. The approved pattern and joining process depend on the belt&#8217;s reinforcement, bonding layers and coating. Confirm the finished profile on both faces and the bending limits for the joined belt.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Forbo&#8217;s Z-splice is one documented finger construction. Its stepped Z design uses offset finger rows prepared in split belt ends. If a quotation says only \u201cfinger splice,\u201d ask for the drawing or joining specification, especially when the existing belt has a layered carcass. A familiar geometry leaves the allowable load and pulley requirements to the exact belt and joint specification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">LKBELT&#8217;s PVC sawtooth belt information discusses finger and stepped finger options in relation to belt construction and pulley requirements. When ordering this type of patterned belt, describe the underlying build and pulley route alongside the pattern. Ask the supplier how the pattern and joint will meet across the finished splice. <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/pvc-sawtooth-conveyor-belt\/\">PVC sawtooth conveyor belt<\/a><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"411\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-1024x411.jpg\" alt=\"Green fabric reinforced conveyor belt with a zigzag interlocking finger splice and visible layered edge\" class=\"wp-image-6947\" srcset=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-1024x411.jpg 1024w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-300x120.jpg 300w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-767x308.jpg 767w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-18x7.jpg 18w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail-598x240.jpg 598w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg 1370w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">What Are Lap and Stepped-Overlap Joints?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In a lap joint, prepared end areas overlap. The preparation may taper the ends or remove selected layers so the two sides fit together. A stepped-overlap design prepares distinct steps in the layers. The joint transfers load across the joined overlap according to the approved material, preparation and bonding process.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-1024x576.jpg\" alt=\"Green fabric conveyor belt with stepped overlapping layers and visible woven reinforcement at the joint\" class=\"wp-image-6948\" srcset=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-1024x576.jpg 1024w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-768x432.jpg 768w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-300x169.jpg 300w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-18x10.jpg 18w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-1536x864.jpg 1536w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint-599x337.jpg 599w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-stepped-overlap-joint.jpg 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A stepped finger joint has interlocking fingers in its prepared layers. A stepped overlap may use layer steps without those fingers. Ask for a section view when the supplier uses terms such as \u201cstepped\u201d or \u201coverlapped\u201d on their own. Increasing overlap length without the approved design can change the joint&#8217;s profile and bending behavior, so use the supplier&#8217;s specified preparation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Confirm the thickness through the overlap and at its transitions to the belt body. A step or uneven transition may change how the running side contacts a slider bed. Ask which face or orientation the joint requires, and whether the layout includes reverse travel. Forbo&#8217;s guide shows separate wedge, stepped-overlap and stepped Z geometries. Habasit&#8217;s overview gives manufacturer-specific examples of thermoplastic fusion and adhesive bonding with heat and pressure. <a href=\"https:\/\/newwebsitecd.habasit.com\/en-US\/News-and-Articles\/Highlights-Articles\/Fabric_Belt_Joining_Methods-An_Overview\">Habasit fabric belt joining methods<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">When Are Mechanical Belt Fasteners Appropriate?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Mechanical lacing uses fastener elements secured at the belt ends. In a hinged connection, a pin holds the two sides together. Depending on the approved system, the fastener and pin may use metal or a suitable plastic. A removable pin can provide an installation route on a machine where fitting a closed loop would require substantial disassembly.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Confirm how the fastener is retained in the belt and which belt thickness and carcass it is designed for. Ask for its installed profile, the required tooling, pulley limits and the space needed to insert or withdraw the pin. If the belt crosses a scraper or a small transfer, compare the fastener profile with the available clearance. Check access for cleaning and how the joint will be inspected for wear or damage. These questions apply whether the connection is used for routine service or a longer-term installation.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"683\" src=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-1024x683.jpg\" alt=\"\" class=\"wp-image-6949\" srcset=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-1024x683.jpg 1024w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-300x200.jpg 300w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-768x512.jpg 768w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-18x12.jpg 18w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint-600x400.jpg 600w, https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-mechanical-fastener-joint.jpg 1536w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Do PVC, PU, Rubber and Modular Belts Use the Same Joining Methods?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For PVC and PU fabric belts, the coating and carcass guide the selection together. Identify the exact base belt before asking for the approved joint. A polymer name alone gives too little information to choose the end preparation or joining procedure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A rubber-covered textile belt can require a supplier-approved vulcanized, bonded or mechanical splice, depending on the belt and duty. A modular plastic belt uses connecting rods matched to its modules and series. Its connection allows adjacent modules to articulate. Some homogeneous belts have separate joining systems designed around their own material and profile. Intralox&#8217;s ThermoDrive joining options illustrate how a manufacturer specifies connections and tools for a particular belt family. <a href=\"https:\/\/www.intralox.com\/products\/thermodrive\/resources\/belt-joining-options\">Intralox ThermoDrive belt joining options<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How Does the Splice Affect Pulley and Conveyor Compatibility?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Record the smallest pulley or nosebar that the joint actually wraps, the direction of each bend and any reverse bending on the return. Confirm the finished joint&#8217;s permitted route with the supplier. Thickness and local flexibility both matter. A splice can clear a stationary opening and still be unsuitable for repeated flexing around a small pulley. <a href=\"https:\/\/www.lkbelt.com\/zh\/belt-conveyor-components-belt-selection\/\">Conveyor components and belt compatibility<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Check both faces where the joint meets supports and cleaning equipment. A raised running-side feature can alter contact with a slider bed. A carrying-side step or a projecting fastener can interfere with a scraper or transfer. Give the supplier the actual clearances, including where guides pass through grooves and where cleats or sidewalls pass fixed hardware. Show the direction of travel and any reversing operation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">LKBELT&#8217;s PVC sidewall and cleat belt page describes single-layer finger and overlapped finger options. For that assembly, send the joint location relative to the cleat pitch and sidewall ends. Include any underside guide, the pulley route and installation access. The appropriate joint depends on how the completed assembly fits and runs. <a href=\"https:\/\/www.lkbelt.com\/zh\/product\/anti-skid-food-grade-pvc-conveyor-belt-with-sidewall-cleat\/\">PVC conveyor belt with sidewalls and cleats<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conveyor Belt Splice Selection Matrix<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Splice family<\/th><th>Construction and joining considerations<\/th><th>Conveyor compatibility<\/th><th>What buyers must verify<\/th><th>Common mistake<\/th><\/tr><\/thead><tbody><tr><td>Finger or Z-style<\/td><td>Interlocking prepared ends joined by the approved process<\/td><td>Local flexibility and face profile through bends and transfers<\/td><td>Finger geometry, finished thickness and approved bend conditions<\/td><td>Specifying \u201cfinger\u201d without identifying the belt build<\/td><\/tr><tr><td>Stepped finger<\/td><td>Finger rows prepared at different levels in the belt ends<\/td><td>Suitability for the carcass and repeated bending<\/td><td>Layer preparation and the approved joint drawing<\/td><td>Treating every stepped joint as an overlap without fingers<\/td><\/tr><tr><td>Wedge splice<\/td><td>Opposite faces are beveled to form tapered ends that overlap and are joined<\/td><td>Check the finished profile through the taper and its flexibility around bends<\/td><td>Bevel geometry, joining process, finished thickness and approved pulley or nosebar route<\/td><td>Assuming a smooth taper confirms bending compatibility<\/td><\/tr><tr><td>Lap \/ stepped-overlap splice<\/td><td>Prepared end areas overlap. A stepped design prepares discrete steps in the layers<\/td><td>Check thickness and flexibility across the overlap and clearance at the transitions<\/td><td>Layer preparation, overlap geometry, finished thickness, approved bends and any specified travel direction<\/td><td>Assuming a longer overlap improves the joint<\/td><\/tr><tr><td>Mechanical lacing<\/td><td>End fasteners connect through a compatible pin in a hinged system<\/td><td>Installed height, pulley route, access for pin removal and cleaning<\/td><td>Fastener retention, belt thickness range, tooling and clearance<\/td><td>Choosing solely for ease of opening<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Two Practical Industrial Selection Scenarios<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Compact packaging transfer<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Suppose a short conveyor transfers small cartons over a tight nosebar. Two offers match the belt width and carrying finish. One proposes a finger joint. The other proposes an overlap with a different local profile. Send both suppliers the nosebar drawing, the return route and the transfer clearances. Ask for the finished joint section and written confirmation that it can flex through the route under the required duty. Then check whether a carton can pass the joint and transfer without interference. Judge each offer using the finished joint data for that belt.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Limited installation access<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Suppose a conveyor frame prevents a closed loop from being fitted without removing a shaft or support. Compare the approved routes for installation. A pre-joined endless belt requires a plan for opening and reassembling the machine. A prepared open belt needs an accessible work area, the approved joining procedure, suitable equipment and an inspection plan. An openable mechanical splice needs pin access and adequate clearance throughout the route.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ask maintenance to estimate the shutdown scope for each feasible route. Include disassembly, joining, inspection and restart checks. If the original belt is already damaged, assess its condition separately before deciding whether a replacement is needed. <a href=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-repair-vs-replacement\/\">Conveyor belt damage and replacement assessment<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Should Buyers Specify Before Ordering a Spliced Belt?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Use the original specification and the machine layout as the common basis for quotations. Include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Original model and drawing revision, carrying face, underside, reinforcement and ply arrangement.<\/li>\n\n\n\n<li>Finished width, length and its measurement reference, belt body thickness and required joint thickness or clearance.<\/li>\n\n\n\n<li>Proposed joint geometry and process, with a drawing or specification and photos of the original joint.<\/li>\n\n\n\n<li>Pulley and nosebar dimensions, reverse bends, support type, take-up arrangement and travel direction.<\/li>\n\n\n\n<li>Scraper, transfer and guide clearances, plus cleat or sidewall locations relative to the joint.<\/li>\n\n\n\n<li>Load, speed, working tension where documented, operating cycle and cleaning conditions.<\/li>\n\n\n\n<li>Supply form, installation access, approved tooling or field procedure, and agreed acceptance checks.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Agree on checks before release. Verify finished dimensions, joint alignment, edges and both face profiles against the approved specification. Check pin retention for a mechanical joint and look for visible separation or defects using the supplier&#8217;s criteria. Obtain the applicable working and bending approval for the exact joined construction. Visual inspection helps establish fit and workmanship. Acceptance of the working load and route also requires the applicable technical documentation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">How does a finger splice differ from a lap splice?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Finger-shaped ends interlock. Prepared ends in a lap splice overlap. Ask for the approved geometry and joining process for the offered belt.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can a mechanical splice be used for routine service?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes, if the belt, fastener and machine are approved for the duty. Check retention, clearances, pulley compatibility and cleaning access.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can the same process join every PVC or PU fabric belt?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The approved process depends on the coating, reinforcement and complete construction. Identify the exact belt before selecting a procedure.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What should I check when the conveyor has a small pulley?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Ask for the joined belt&#8217;s permitted bending conditions and verify the complete route, including any reverse bend. Check finished joint clearance at nearby hardware.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">When should I order a pre-joined endless belt?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Consider it when the machine can accept a closed loop and the approved joint meets the duty. For restricted access, compare the work needed for a prepared open belt or an approved openable connection.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Compare splice proposals against the same belt construction, pulley route and installation plan. A complete proposal defines the joint geometry, joining process, delivered form and the checks needed before the belt enters service.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For an LKBELT quotation, share the original belt reference, finished dimensions, joint drawing or photographs, pulley arrangement and installation constraints. <a href=\"https:\/\/www.lkbelt.com\/zh\/contact-us-industrial-belt-connect\/\">Contact LKBELT about a spliced conveyor belt<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Two replacement belts can match the original width, length and cover material yet behave differently at a small transfer. A [&hellip;]<\/p>","protected":false},"author":1,"featured_media":6947,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[309],"tags":[],"class_list":["post-6944","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-news"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Conveyor Belt Splice Types: Finger, Lap &amp; Mechanical<\/title>\n<meta name=\"description\" content=\"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Conveyor Belt Splice Types: Finger, Lap &amp; Mechanical\" \/>\n<meta property=\"og:description\" content=\"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=100065289171531\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-13T09:02:59+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-13T09:03:01+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1370\" \/>\n\t<meta property=\"og:image:height\" content=\"550\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"LKBELT Team\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u4f5c\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"LKBELT Team\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data2\" content=\"12 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/\"},\"author\":{\"name\":\"LKBELT Team\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\"},\"headline\":\"Conveyor Belt Splice Types: Finger, Lap and Mechanical Joints\",\"datePublished\":\"2026-11-13T09:02:59+00:00\",\"dateModified\":\"2026-11-13T09:03:01+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/\"},\"wordCount\":1999,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/conveyor-belt-finger-splice-detail.jpg\",\"articleSection\":[\"Industry News\"],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/\",\"name\":\"Conveyor Belt Splice Types: Finger, Lap & Mechanical\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/conveyor-belt-finger-splice-detail.jpg\",\"datePublished\":\"2026-11-13T09:02:59+00:00\",\"dateModified\":\"2026-11-13T09:03:01+00:00\",\"description\":\"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/conveyor-belt-finger-splice-detail.jpg\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/conveyor-belt-finger-splice-detail.jpg\",\"width\":1370,\"height\":550},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/conveyor-belt-splice-types\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Industry News\",\"item\":\"https:\\\/\\\/www.lkbelt.com\\\/category\\\/industry-news\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Conveyor Belt Splice Types: Finger, Lap and Mechanical Joints\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#website\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"name\":\"lkbelt\",\"description\":\"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lkbelt.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#organization\",\"name\":\"lkbelt\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"contentUrl\":\"https:\\\/\\\/www.lkbelt.com\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/liboicon1.png\",\"width\":200,\"height\":200,\"caption\":\"lkbelt\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=100065289171531\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lkbelt.com\\\/#\\\/schema\\\/person\\\/8685a57f08cb86c5a1c655392bdaa9b1\",\"name\":\"LKBELT Team\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g\",\"caption\":\"LKBELT Team\"},\"sameAs\":[\"https:\\\/\\\/www.lkbelt.com\\\/\"],\"url\":\"https:\\\/\\\/www.lkbelt.com\\\/zh\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Conveyor Belt Splice Types: Finger, Lap & Mechanical","description":"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/","og_locale":"zh_CN","og_type":"article","og_title":"Conveyor Belt Splice Types: Finger, Lap & Mechanical","og_description":"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.","og_url":"https:\/\/www.lkbelt.com\/zh\/conveyor-belt-splice-types\/","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=100065289171531","article_published_time":"2026-11-13T09:02:59+00:00","article_modified_time":"2026-11-13T09:03:01+00:00","og_image":[{"width":1370,"height":550,"url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg","type":"image\/jpeg"}],"author":"LKBELT Team","twitter_card":"summary_large_image","twitter_misc":{"\u4f5c\u8005":"LKBELT Team","\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4":"12 \u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#article","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/"},"author":{"name":"LKBELT Team","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1"},"headline":"Conveyor Belt Splice Types: Finger, Lap and Mechanical Joints","datePublished":"2026-11-13T09:02:59+00:00","dateModified":"2026-11-13T09:03:01+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/"},"wordCount":1999,"publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"image":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg","articleSection":["Industry News"],"inLanguage":"zh-Hans"},{"@type":"WebPage","@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/","url":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/","name":"Conveyor Belt Splice Types: Finger, Lap & Mechanical","isPartOf":{"@id":"https:\/\/www.lkbelt.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#primaryimage"},"image":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg","datePublished":"2026-11-13T09:02:59+00:00","dateModified":"2026-11-13T09:03:01+00:00","description":"Compare conveyor belt splice types, including finger, lap and mechanical joints. Learn how belt construction, pulley size and installation affect selection.","breadcrumb":{"@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#breadcrumb"},"inLanguage":"zh-Hans","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/"]}]},{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#primaryimage","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2026\/11\/conveyor-belt-finger-splice-detail.jpg","width":1370,"height":550},{"@type":"BreadcrumbList","@id":"https:\/\/www.lkbelt.com\/conveyor-belt-splice-types\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.lkbelt.com\/"},{"@type":"ListItem","position":2,"name":"Industry News","item":"https:\/\/www.lkbelt.com\/category\/industry-news\/"},{"@type":"ListItem","position":3,"name":"Conveyor Belt Splice Types: Finger, Lap and Mechanical Joints"}]},{"@type":"WebSite","@id":"https:\/\/www.lkbelt.com\/#website","url":"https:\/\/www.lkbelt.com\/","name":"lkbelt","description":"Industrial belts Conveyor belts Reveal High - quality and Durable Conveyor Belts, Transmission Belts, Nylon Flat Belts and Timing Belts,lkbelt,Explore belts of different materials for diverse industrial transmission scenarios","publisher":{"@id":"https:\/\/www.lkbelt.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lkbelt.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"zh-Hans"},{"@type":"Organization","@id":"https:\/\/www.lkbelt.com\/#organization","name":"lkbelt","url":"https:\/\/www.lkbelt.com\/","logo":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","contentUrl":"https:\/\/www.lkbelt.com\/wp-content\/uploads\/2024\/05\/liboicon1.png","width":200,"height":200,"caption":"lkbelt"},"image":{"@id":"https:\/\/www.lkbelt.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=100065289171531"]},{"@type":"Person","@id":"https:\/\/www.lkbelt.com\/#\/schema\/person\/8685a57f08cb86c5a1c655392bdaa9b1","name":"LKBELT Team","image":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/0baaf4c38117f4c0caa112518966e4406aebfe5a471c8973a910840cb2baef1b?s=96&d=mm&r=g","caption":"LKBELT Team"},"sameAs":["https:\/\/www.lkbelt.com\/"],"url":"https:\/\/www.lkbelt.com\/zh\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/6944","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/comments?post=6944"}],"version-history":[{"count":2,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/6944\/revisions"}],"predecessor-version":[{"id":6950,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/posts\/6944\/revisions\/6950"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media\/6947"}],"wp:attachment":[{"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/media?parent=6944"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/categories?post=6944"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lkbelt.com\/zh\/wp-json\/wp\/v2\/tags?post=6944"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}