Product description

Steel Industry automatic slitter machine tensile belt

Steel plate needs to rewind after slit . The tension belt on the slitter machine , given the certain tension to the steel plate when it’s rewinding , to ensure the tightness ，regular of the slit plate . Often used to steel plate which Surface is high requirement . Such :Corrosion resistant plate. Galvanized steel plate. Prepainted steel sheet etc..
 
Our company adopt imported material . According to the customer’s request to cut ,connect into a endless belt . And supplying with following :

Type:L500/28:Surface leather with high wear resistance, Careful leather surface can prevent the most minor scratches of the steel plate surface . High elastic fiber in the middle, can guarantee the belt provides balanced pressure to steel plate, then the relative movement between the belt and steel plate to a   minimum. High strength polyester silk knitting layer At the bottom have the high tensile strength, good toughness and can meet the needs of the tell operation; And high temperature resistant, resistant to wear and tear. The belt size precision is high.

Product Series	Belt Type	Thickness	Material	Color	Layer	1%Elongation(kg/cm)	Weight(kg/m2)	Min-Wheel Diameter(mm)	Temperature Range（°c)	Producing  width     (m)
Steel Industry Blet	R-2M0830-FDA	3.0	PU	White	2	8	3.2	60	-20-+100	3000
	R-2M0916	1.5	PU	Dark Green	2	10	1.4	40	-20-+100	3000
	F-3M0835-A0	3.5	PU	Black	3	15	4	80	-20-+100	3000
	R-3M0832-A20	3.2	PU	Dark Green	3	13	3.5	80	-20-+100	3000